Sponsored by CSM
CSM Gmbh, the industry leader of innovative measurement and data technology for 38 years, announces the newest product to its suite of measurement modules for the development of electric vehicles. This new HV Breakout-Module has been specifically designed to meet the international safety standards required for the use of equipment in high-voltage applications on electric vehicles. This new module simplifies the instrumentation, improves accuracy, and reduces costs compared to systems which were not designed for in-vehicle use. When combined with Vector Informatik’s eMobility Analyzer, real-time power analysis can be performed in the test bench and test vehicle.
The new HV Breakout Module (HV BM) 3.3 from CSM Computer-Systeme-Messtechnik GmbH enables for the first time the electrical power analysis of vehicle engines without the use of classical power meters and current transformers. The module is suitable for use in powertrain test benches as well as for mobile, real-time measurement in the high-voltage electrical system of test vehicles.
The HV BM 3.3 samples current and voltage signals at 2 MS/s and sends the sampled values via XCP-on-Ethernet directly to the Vector Informatik software vMeasure exp or CANape. The measured raw data is stored and power values are calculated in real time using the integrated eMobilityAnalyzer function library. The eMobilityAnalyzer calculates motor power values such as active power, apparent and reactive power, power factor, electrical speed, harmonics, total energy or the effective power of the motor windings. At the same time, a graphical online display of all measured values and power parameters is available. This breakout module, and all of CSM’s products are the basic foundation for the Vector-CSM eMobility Measurement System (learn more here www.csm.de/ev-emobsys).
In the HV Breakout Module 3.3, high-voltage cables up to 95 mm2 can be connected directly. High-voltage cables are fed into the module via suitable PG cable glands and connected with appropriately sized ring terminals. Alternatively, instead of PG glands, the HV BM 3.3C can also be supplied with 3-phase PowerLog connectors. This allows easy connection of DUTs, especially in powertrain test benches, to reduce changeover times. These connections, and the module itself, provide a system which meets EN 61010:1 requirements for using electronic equipment in high-voltage environments.
For 3-phase power measurement, the measurement circuit for currents and voltages is already installed in the module. This eliminates the need for cumbersome cabling and eliminates the associated interference. Phase currents and voltages up to 1,400 A and 2,000 V are sampled synchronously within 1 µs with the module. Complex phase correction for power measurement, as was previously common, is no longer necessary. The direct A/D conversion in the module and transmission of digital samples avoids electromagnetic interference in the environment of high-speed traction inverters.
The number of channels for power analysis can be easily expanded: The measurement data of further HV Breakout Modules, for example used between the battery (-ies) and inverter(s) or other vehicle components, are synchronously integrated in the measurement chain via an EtherCAT® interface. This enables power efficiency analysis of the components in the powertrain with minimal effort.
A new, dedicated webpage is available where you can learn more about the entire HV Breakout Module product line (www.csm.de/ev-hvbm) and specifically for the HV BM 3.3 here (www.csm.de/ev-hvbm33).
Additional HV-safe and conventional CSM MiniModules for measuring temperatures, vibration, torque and speed can be added via a CAN interface in order to approach load points with temperature accuracy and to record efficiency maps. You can learn more about CSM’s modules designed specifically to meet the EN61010 safety requirements here (www.csm.de/ev-hvmodules).
Time synchronization with other data sources, such as ECU data, is performed using PTP synchronization according to the IEEE1588 standard.
The HV BM 3.3 is designed for harsh environments and can operate in ambient temperatures from -40 °C to +125 °C. A high-voltage and interference-proof encapsulated design with temperature-compensated shunt modules ensures very high accuracy over the entire temperature range.
CSM is a leading, highly innovative manufacturer of decentralized networked, robust measurement technology and data loggers for applications in vehicles and test benches. We have been setting technological standards in this field for over 35 years. Our products are successfully used worldwide by almost all manufacturers of passenger cars, commercial, agricultural, and material handling vehicles as well as their suppliers and service providers.
Continuous innovation and long-term satisfied customers are our guarantee for success. With our high-voltage safe measurement and breakout modules developed for fast and synchronous measurements on electric and hybrid vehicles, we actively accompany our customers’ transformation towards eMobility.
Sponsored by CSM