EV Engineering News

Green Watt Power releases 500 W IP67 DC/DC converters for EVs

Green Watt Power, a division of Powerland that manufactures EV chargers and DC/DC converters in California, has announced a new series of IP67-rated DC/DC converters for EVs.

The fully enclosed, IP67-ruggedized EVD500 Marble Series offers two DC input ranges featuring output voltages of 12 V and 24 V to power auxiliary EV functions such as lights, instruments and accessories. It has Enable/Remote on/off and a quiescent current draw of less than 30 µA for low battery conservation. The EVD500 Marble Series is input-to-output isolated and protected against input under-voltage lockout, reverse polarity, over-voltage, short-circuit and over-temperature.

Main features include:

  • DC input ranges of 30-65 V and 50-130 V
  • DC output voltage of 13.5 V or 27.5 V
  • Output power of 500 W to 5,000 W with parallel connection of up to 10 units
  • Efficiency of up to 93%
  • All-around protections: IRPP, UVLO, OVP, SCP, OTP
  • 1.5 kV input-to-output isolation test voltage
  • Designed to meet IEC, UL and CSA safety requirements
  • Wide working temperature: -40 °C to +85 °C Tc
  • Available with Molex connector or flying leads

“Unlike most DC/DC converters in the EV market, the EVD500 has a constant current function, so it can connect directly to a battery load,” the company said.

Source: Green Watt Power

Create Account. Already Registered? Log In

Virtual Conference on EV Engineering: Free to Attend

Don't miss our next Virtual Conference on April 15-18, 2024. Register for the free webinar sessions below and reserve your spot to watch them live or on-demand.


EV Engineering Webinars & Whitepapers

EV Tech Explained