EV Engineering News

Evaluating EV components with non-destructive X-ray computed tomography (Webinar)

In this free webinar at our Fall Virtual Conference (October 17-20, 2022), presented by ZEISS Industrial Quality Solutions, we will demonstrate the utility of Computed Tomography (CT) for non-destructive evaluation of electric vehicle components. CT imaging aids in quality assurance, manufacturing optimization, and failure analysis. Examples of the range of capabilities will be shown, including battery module defect detection.

Reserve your spot—it’s free!

Other sessions at our Fall Virtual Conference include:

Next Generation Battery Testing Equipment

In this presentation, we will cover the fundamentals of battery testing. After the introduction, we will discuss how battery testing requirements have changed in recent years, according to customer feedback and market trends.

To meet these ever-changing demands, Bitrode has been heavily investing in research and development and as members of Bitrode’s New Product Development team, we will describe the technological innovations that we are envisioning in Bitrode’s new products.

Reserve your spot—it’s free!

Three Key Considerations To Optimize Your Inter-Cell Battery Material

As battery designs continue to evolve, battery packaging remains very important to the service life and safety of a battery. This webinar will explore the key considerations to designing inter-cell battery packaging: battery performance, thermal runaway delay and reducing wasted space in the overall pack design.

Join us as we present the work Rogers is doing to develop elastomeric materials that make maximize the functionality and customizability of battery pad materials.

Register here to learn more—it’s free!

Managing Heat in EV Battery Packs with Adhesive Tapes and Precision Converting

An EV battery must hold a large amount of energy to ensure consumers can drive as fast and as far as they need. However, storing this amount of energy in such a confined space comes with challenges related to thermal protection and heat management. The industry has discovered that such challenges must be addressed to further optimize battery safety, performance, and capacity. This webinar will explore opportunities to address those challenges with adhesive tapes and precision converting.

Points to be discussed:

  • Understanding the challenges of thermal protection and heat management in EV batteries.  
  • Discussing the implications for battery safety, performance, and capacity.
  • Learning how to address those challenges with adhesive tapes and high precision converting, including:
    • Identifying and defining specific areas of concern
    • Introduction of high performing materials designed to handle these issues
    • Converting methods and advantages that turn these materials into functioning components for efficient assembly at the cell, module and pack levels.

Register here to learn more—it’s free!


See the full session list for the Fall Virtual Conference on EV Engineering here.

Broadcast live October 17 – 20, 2022, the conference content will span the EV engineering supply chain and ecosystem, including motor and power electronics design and manufacturing, cell development, battery systems, testing, powertrains, thermal management, circuit protection, wire and cable, EMI/EMC and more.

Comment
Create Account. Already Registered? Log In

Virtual Conference on EV Engineering: Free to Attend

Don't miss our next Virtual Conference on April 15-18, 2024. Register for the free webinar sessions below and reserve your spot to watch them live or on-demand.

LOAD MORE SESSIONS

EV Engineering Webinars & Whitepapers

EV Tech Explained